Swagelok® PFA Tubing and Model FTF 1000 Tube Flaring System
Swagelok offers a range of high-purity and ultrahigh-purity PFA tubing, complemented by a plastic tube flaring system for use with fine thread flare fittings.

• Ultrahigh-purity PFA tubing
• High-purity PFA tubing
• Model FTF 1000 plastic tube flaring system

More Information
Download the Ultrahigh-Purity PFA Tubing—PFA4 and PFA9D catalog.
Download the PFA Tube Fittings and PFA Tubing catalog.
Download the Plastic Tube Flaring System—Model FTF 1000 catalog.
Contact your authorized Swagelok sales and service representative.

---

Ultrahigh-Purity PFA Tubing—PFA4 and PFA9D
Swagelok UHP PFA tubing is available in ultrahigh-purity and advanced (fluorosurfactant resistant) ultrahigh-purity grades.

Specifications Working Pressure • Fractional Tubing • Metric Tubing Temperature Materials Sizes • Fractional Tubing • Metric Tubing Marking

Up to 300 psig (20.6 bar) Up to 34.4 bar (500 psig) 75 to 350°F (23 to 176°C) Ultrahigh-purity perfluoroalkoxy (PFA) and DuPont® Teflon® PFA 950HP 1/2 through 1 1/4 in. 4 through 10 mm Laser etched with size, material designator, and lot traceability number

More Information
Download the Ultrahigh-Purity PFA Tubing—PFA4 and PFA9D catalog.
Contact your authorized Swagelok sales and service representative.

Features

• 100 % virgin material
• PFA has high thermal stability
• Meets SEMI F57-0301 specifications
• Flammability: UL 94 rated V-O (self‑extinguishing)

Cleaning and Packaging
Ultrahigh-purity fluoropolymer tubing is packaged and shipped with the ends capped in accordance with SEMI F57‑0301.

[Back to top]

---

PFA Tubing

Specifications Working Pressure • Fractional Tubing • Metric Tubing Temperature • Fractional Tubing • Metric Tubing Materials Sizes • Fractional Tubing • Metric Tubing

Up to 275 psig (18.9 bar) Up to 12 bar (174 psig) 70 to 400°F (20 to 204°C) 20 to 200°C (70 to 392°F) PFA/ASTM D3307 Type II 1/8 through 1 in. 6 through 12 mm

More Information
Download the PFA Tube Fittings and PFA Tubing catalog.
Find hoses and flexible tubing in the product search and enter "PFA" in the keyword search.

[Back to top]

---

Plastic Tube Flaring System—Model FTF 1000
The Swagelok Model FTF 1000 is a complete, easy-to-operate tool for precision flaring of 1/4, 3/8, 1/2, 3/4, and 1 in. plastic tubing. The self-contained fixtures align and support the tubing during the flaring process, while the electronic controls ensure accurate, uniform tubing flares. With a cycle time of approximately one minute, the plastic tube flaring system reduces installation time.

Specifications Power Requirements Heat Source Dimensions Programmable Electronic Control Ranges: • Temperature • Heat Time • Cooling Time Tubing Size Range

110 V (ac), 60 Hz Radial conduction 14 W × 16.9 L × 10.5 H in. (356 × 430 × 267 mm) 100 to 300°C (212 to 572°F) 10 to 100 seconds 10 to 100 seconds 1/4 to 1 in.

Features

• Ready-to-install flared tube end is complete in three easy steps: heat, clamp, and flare
• Five mandrel sizes are built into the fixture—no loose mandrels to misplace or damage
• Flared end is “cool to the touch” at the end of the cycle—no additional cool down time is required
• Flaring process takes about a minute; flared tube can be used immediately or stored for later use
• Controlled process minimizes post-forming shrinkage to ensure accurate, repeatable results
• Finished tube flare matches the nose geometry of the fitting promoting excellent sealing performance at make-up
• Shipped fully assembled in a heavy-duty, custom case for ease of storage and transport.
• Power cord and instruction manual are included.

[Back to top]