Swagelok® Toggle Valves—OG, 1G, and 92 Series
On-off operation is quick and easy with the Swagelok toggle valve, available in brass and 316 stainless steel material.
Up to 300 psig (20.6 bar)
–20 to 200°F (–28 to 93°C)
Up to 0.70
316 stainless steel, brass
Swagelok tube fitting, NPT
1/8 to 1/2 in.; 3 to 12 mm
- Compact, rugged design
- Opens and closes quickly
- Soft-seat shutoff
- O-ring stem seal needs no adjustment
- Straight, angle, and cross flow patterns
- Panel mounting
Normally Closed, High-Pressure Normally Closed, and Double Acting
Pneumatic Actuator Features
- Valve and actuator are fully assembled and factory tested.
- Positive stem retraction prevents sticking.
- Rotatable actuator port allows easy installation.
Normally closed, normally open, double acting, and high-pressure normally closed.
Standard, low temperature, high temperature, and nonfluorocarbon.
Every Swagelok toggle valve is factory tested with nitrogen at 200 psig (13.7 bar)
at the seat and seal. There is a requirement of no detectable leakage with a liquid
Cleaning and Packaging
Every Swagelok toggle valve is cleaned and packaged in accordance with Swagelok
Standard Cleaning and Packaging (SC-10).
Options and Accessories
Fluorocarbon FKM O-rings are standard; Buna C, Buna N, ethylene propylene,
Kalrez®. and silicone materials are available. Fluorocarbon FKM O-ring kits are
Black nylon handles are standard; blue, green, orange, red, and yellow
nylon are available. Black urethane-painted aluminum, black anodized aluminum, and
stainless steel handles are available.
The handle positioner enables setting a valve handle in a desired position and prevents
it from rotating. The handle position is available factory assembled and in kits
for field assembly.
The spring-return pin stops the valve from being left in the open position.
Manual valves with Buna C O-rings, aluminum handles, and lithium-thickened, silicone-based
lubricant are available for low-temperature service from –65 to 200°F (–53 to 93°C).