Swagelok gauges provide accurate pressure measurement for industrial, ultrahigh-purity,
and sanitary applications. They are offered in a wide range of pressure ranges,
dial sizes, connections, mountings, and options to support a wide range of customer
- Industrial and Process Pressure Gauges
- Ultrahigh-Purity Pressure Gauges
- Sanitary Pressure Gauges
Tube Adapters Solve Alignment Problems
Swagelok tube adapters can help eliminate difficult alignment problems and can be
used with any Swagelok tube fitting. For example, when installing a gauge with a
pipe fitting end connection, it is often difficult to align the dial to the desired
position without damaging the gauge. However, gauges with integral Swagelok tube
adapters eliminate alignment problems.
Swagelok® Pressure Transducers
Swagelok pressure transducers provide accurate electronic pressure monitoring for industrial and ultrahigh-purity applications. They are offered in a wide range of pressure ranges, process connections, electrical connectors, and output signals to support a wide range of customer requirements.
- Industrial Pressure Transducers
- Ultrahigh-Purity Pressure Transducers
Thermometers, Dampened-Movement Bimetal
Swagelok thermometers are actuated by a bimetal helix coil. Silicone-free gel inserts dampen vibration effects, and cases are hermetically sealed in accordance with ASME B40.200 to prevent fogging and moisture damage to internal components.
• –100 to 150° through 200 to 1000°F
• –70 to 70°C through 100 to 540°C
± 1 % of full scale in accordance with ASME B40.200
Silicone-free inert gel
Adjustable-angle, center-back mount, lower-back mount
3 in. (76.2 mm); 5 in. (127 mm)
0.25 in. (6.4 mm) dia; 2.5 through 12 in. (63.5 through 305 mm) lengths
1/2 in. NPT standard, G1/2B available
Thermowells are recommended to protect Swagelok dampened-movement bimetal thermometers from damage that could result from contact with pressurized, corrosive, flowing, viscous, or abrasive process fluids. They also enable removal of thermometers for replacement or service without affecting the process or system.
ASME B16.5 raised-face flange, 3-A–compliant sanitary Kwik-Clamp, threaded (NPT), weld socket
1/2 in. NPSM straight pipe thread for mechanical joints standard; G1/2B optional
0.260 in. (6.6 mm) bore;
1/2 through 2 in. process connections
Variable Area Flowmeters
Swagelok® variable area flowmeters measure the flow rate of liquids and gases by means of a tapered tube and float. The float is pushed up by increasing fluid flow and pulled down by gravity as fluid flow decreases.
- Simple installation
- Easy to read
- No wearing parts
- Limit switches available
- 10-to-1 turndown ratio (the lowest measurement is one tenth of the full-scale reading); measurement ranges are available in U.S. customary and metric scales.
- Meters are marked with the fluid media and unit of measure for which they are calibrated.
- Meters can be factory calibrated to customer process specifications.