Swagelok offers a range of PFA fitting shapes and sizes, including high-purity fine thread flare and tube fittings in straight, elbow, and tee configurations for use with 1/8 to 1 in. tubing.

• High-purity fine thread flare PFA fittings
• PFA tube fittings

More Information
Download the High-Purity PFA Fine Thread Flare Fittings catalog.
Download the PFA Tube Fittings and PFA Tubing catalog.

Other Plastic Products
PFA tubing
PFA plug valves
PFA needle valves
UHP fluoropolymer diaphragm valves
UHP fluoropolymer check valves

---

Specifications Working Pressure Temperature Materials • Fitting Body • Nut Sizes Configurations

Up to 275 psig (18.9 bar) 70 to to 350°F (20 to 176°C) High-purity PFA PVDF (standard); PFA (optional) 1/4, 3/8, 1/2, 3/4, 1 in. Straights, elbows, tees; space maker elbows and tees; multiflare, transition, and double containment fittings; caps, plugs, nuts

More Information

• PFA and PVDF nut options
• A wide variety of configurations

Options
Contact your authorized Swagelok sales and service representative for additional configurations and custom fittings.

Specifications Working Pressure Temperature Materials Sizes Configurations

Up to 275 psig (18.9 bar) 70 to 400°F (20 to 204°C) Molded PFA/ASTM D3307 Type I 1/8 to 1/2 in. Straights, elbows, tees; ferrules, caps, plugs, nuts

• Audible click ensures tubing is inserted properly.
• Visual indication of proper pull-up:
  • no gap between body hex and hex nut
  • hex flat alignment.
• Smooth, molded internal wetted surfaces reduce potential for system contamination.
• Grooved tubing allows for higher working pressure.
• Wrench make-up avoids the potentially unsafe practices of hand make-up and disassembly.

Accessories

• Groove cutters groove PFA tubing for use with Swagelok PFA tube fittings.

• A tube cutter for plastic tubing up to 1 in. outside diameter is available.

[Back to top]