Swagelok® Pressure Transducers, Ultrahigh-Purity—PTU Series
The Swagelok PTU series pressure transducer provides electronic monitoring of system pressure for ultrahigh-purity applications. The PTU series pressure transducer is available with a variety of pressure ranges, process connections, electrical connectors, and output signals.

Specifications Pressure Ranges Temperature Ranges • Storage and Medium • Ambient Process Connections Electrical Connectors Performance • Accuracy (Limit-Point Calibration) • Linearity • Repeatability • Reproducibility

Vacuum to 5000 psi; 400 bar; 40 MPa –40 to 212°F (–40 to 100°C) –4 to 185°F (–20 to 85°C) Swagelok VCR® metal gasket face seal, Micro-Fit® weld tee, tube butt weld, and modular surface mount (MSM) end connections Bendix, 4-pin MIL plug; M12 × 1, 4-pin circular connector; direct wire, 1.5 or 3 m flying lead; 15-pin sub-D connector; Tajimi circular connector R03-R6F ≤ 0.5 % of span, limit-point calibration, for pressure ≥ 0 psig (≤ 0.25 BFSL); ≤ 1.5 % of span for pressure ≤ 0 psig (≤ 0.75 BFSL) ≤0.2 % of span ≤0.05 % of span ≤0.15 % of span

More Information
Download the Pressure Transducers, Ultrahigh-Purity—PTU Series catalog.
Download the PTU Series Pressure Transducer Technical Report.
Find pressure transducers in the product search.
See industrial pressure transducers.

Features

• Metal-thin film sensing technology, which consists of a metal-thin film resistor bridge on an Elgiloy® diaphragm, enables PTU series pressure transducers to maintain reliable readings over a wide range of temperatures.
• Modular construction and configurable, renewable electronics that enable interchangeability of internal components provide flexibility, reduce inventory, and make any required maintenance quick and simple.
• All wetted components are 316L VIM-VAR stainless steel and Elgiloy to promote corrosion resistance and clean operation.
• Standard transducer enclosure meets Ingress Protection IP65/NEMA4 or IP54/NEMA3.
• Genuine VCR face seal fittings

Testing
Every Swagelok PTU series pressure transducer is factory inboard vacuum tested with helium to a maximum leak rate of 2 × 10–9 std cm³/s.

Calibration
Every Swagelok PTU series pressure transducer receives a five-point pressure calibration to ensure proper operation over the designated pressure range. A certificate of calibration is supplied with each transducer.

Cleaning and Packaging
Every Swagelok PTU series pressure transducer is assembled, cleaned, and packaged in a Class 100 cleanroom.

Options

• Digital display indicator with two programmable switching points, user-configurable units, and front or top view
• 13-point pressure calibration traceable to Deutscher Kalibreirdienst (DKD), German Calibration Service
• Typical material certification (part number and purchase order number specific)
• Material Mill 3.1B Certification