|
|
|
| |
|
Home
> Pipe Thread Sealants
|
Swagelok® Pipe Thread Sealants
Swagelok pipe thread sealants are compatible with a wide range of chemicals, enabling leak-tight sealing in a variety of applications.
More Information
Download the Swagelok Leak Detectors, Lubricants, and Sealants catalog.
Find pipe thread sealants in the product search.
SWAK® Anaerobic Pipe Thread Sealant
|
Specifications
Cure Time
Pressure Rating
Temperature Rating
Viscosity
Storage Temperature
Shelf Life |
At room temperature, allow 24 h minimum before pressurizing
Pipe or fitting working pressure up to 10 000 psig (689 bar)
–65 to 350°F (–53 to 176°C)
Greater than 100 000 cP
45 to 85°F (7 to 29°C)
Five years at recommended storage temperature |
Features
- Cures to a bond that resists vibration or shock.
- Lubricates threads, preventing costly thread damage due to galling and seizing during assembly.
- Allows low breakaway torque for easy-to-break connections, even after fully cured.
- Is compatible with a wide range of chemicals.
- Applies quickly and easily.
- Clings to threads and will not shred or tear on assembly.
- Available in 6, 50, and 250 cm³ tube sizes.
PTFE Tape Pipe Thread Sealant
|
Specifications
Temperature Rating
Tape Sizes |
Up to 450°F (232°C)
• 1/4 by 576 in. (6.4 mm by 1463 cm) for 1/8 to 3/8 in. male tapered pipe
• 1/2 by 288 in. (12.7 mm by 732 cm) for 1/2 in. and up male tapered pipe |
Features
- Conforms to Commercial Item Description A-A-58092
Applications
- Plastics
- Chemicals
- Aluminum
- Corrosives
- Stainless steel
- Hydraulic fluids
|
- Ceramic
- Refrigerants
- Synthetic rubber
- Aromatic fuels
- Carbon steel and special alloys
|
PTFE-Free Pipe Thread Sealant
|
Specifications
Pressure Rating
Temperature Rating
Flash Point
Storage |
Pipe or fitting working pressure up to 10 000 psig (689 bar) at room temperature
–65 to 300°F (–53 to 148°C)
355°F (179°C)
Shelf life is up to 5 years when stored at 45 to 85°F (8 to 29°C). |
Features
- Seals immediately.
- Lubricates threads, preventing costly thread damage from galling and seizing during assembly.
- Allows low breakaway torque for easy-to-break connections.
- Is compatible with a wide range of chemicals.
- Clings to threads and will not shred or tear on assembly.
- Available in 1.69 fl oz (59 cm³) tube.
|
|
|
|
Find a
Sales & Service Center
|
|
|
|
|