|
|
|
| |
|
Home
> Gas Filters—FC Series
|
Swagelok® Gas Filters—FC Series
FC series gas filters are available for coalescing or particle filtration service to remove liquid or particulate contaminants.
 |
Specifications
Working Pressure
Differential Pressure
Temperature
Body Material
Element
• Material
• Nominal Pore Size
• Particulate Efficiency
End Connections
• Type
• Size |
Up to 1000 psig (68.9 bar)
2 psi (0.13 bar)
0 to 400°F (–17 to 204°C)
316 stainless steel
Borosilicate glass fiber with epoxy or silica binder
0.1, 0.3, 1.0 µm
99.99 %
Female Swagelok tube fitting, female NPT, female ISO
1/8 and 1/4 in.; 6 mm |
More Information
Download the Gas Filters—FC Series catalog.
Find coalescing and particle filters in the product search.
Other Filters
General-service all-welded inline, inline, and tee-type filters
Ultrahigh-purity gas filters
Features
- Designed for on-line process analyzers.
- Easy element replacement.
- Horizontal mounting reduces panel space requirements.
- Drain connection port located on body eliminates need to disconnect line when changing elements.
- Stainless steel construction enhances system cleanliness.
- Captured bowl nut can be assembled hand-tight or wrench-tight.
- Bowl-to-body O-ring seal is available in fluorocarbon FKM, PTFE, and Kalrez® for a broad range of chemical compatibility.
- Perforated sleeve
- provides rigid support for filter element
- allows unobstructed fluid flow.
- Element-to-bowl seal
- centers element
- prevents bypass flow
- minimizes element deformation
|
|
Coalescing Filtration
Orientation of the filter housing is critical for proper operation. The drain port must face down.
1 Gas stream enters side port and moves through filter element from inside to outside.
2 Filter element captures fine liquid droplets suspended in the gas forcing them to coalesce (form large drops) within filter element.
3 Large drops are forced to outside of element by gas flow. Gravity forces the drops to fall away from the element.
4 Liquid exits out drain port.
5 Dry, filtered gas exits through top port and flows to process analyzer. |
Particle Filtration
Orientation of the filter is not critical for proper operation.
1 Gas stream enters top port and moves through filter element from outside to inside
2 Filter element captures any particulate suspended in gas. Only a small volume of gas passes through the element.
3 Filtered gas exits side port and flows to the process analyzer.
4 Most gas bypasses filter element, exits through bottom port, and returns to process line. |
Cleaning and Packaging
All FC series filters are cleaned in accordance with Swagelok Standard Cleaning and Packaging
(SC-10).
Options - Special Cleaning and Packaging (SC-11)
- FC series gas filters are available with optional cleaning and packaging in accordance with Swagelok Special Cleaning and Packaging (SC-11), to ensure compliance with product cleanliness requirements stated in ASTM G93 Level C.
- O-Ring Materials
- Fluorocarbon FKM is standard. PTFE and Kalrez are available.
|
|
|
|
Find a
Sales & Service Center
|
|
|
|
|